Pumps - Corro Pump

Corro Pump


These pumps were developed to take maximum advantage from the key features of a group of synthetic thermosetting resins. The resins used are characterised by excellent resistance to chemical attack, strength and hardness comparable with many metals, and a good resistance to abrasion from fluid borne abrasives. A range of resins is used to gain optimum chemical resistance to the many fluids and chemicals encountered in industry.

The Corro Pump® product provides then a cost-effective alternative for many processes which would normally require the use of exotic metal alloy or plastic lined pumps. Equally, other more innocuous but nontheless troublesome fluids such as
chlorinated water and seawater are handled with ease and with useful economy.

 

MATERIAL FEATURES

  • Broadest range of chemical resistance for full operational coverage
  • Suitable for process temperatures from -20º to +140ºC
  • Excellent strength and hardness Resists erosion in chemical slurries
  • Non-Sparking and non-galling Beneficial in solvent applications
  • Does not support bacterial growth and can be steam sterilised
  • Relatively low mass reduced component weight
  • Low vibration and noise due to inherit attenuating properties of resins
  • Low cost when compared with exotic metals and advanced thermoplastics

TYPICAL PROCESS

 

  • Fume scrubbing
  • Chemical manufacturing and processing
  • Fertiliser manufacture
  • Metal refining
  • Metal finishing
  • Municipal recreation pools
  • Desalination plants
  • Aquaculture and marine aquariums